Basic HTML Version
The Resource For All Your Welding, Gases and Safety Supplies!
The Resource - (Arc Welding Equipment Accessories)
2.2
1. Weldmark’s durable tip
insulators are molded
from a high impact/high
temperature fiberglass
compound.
2. The upper lever is fully insulated with a fiberglass
compound, and the low profile design of the upper lever
fits your hand comfortably.
3. Weldmark’s powerful spring holds the electrode securely
in place and prevents electrode slippage. The spring is
protected by a Lexan cup insulator.
4. Weldmark’s specially designed oval-point screw makes
it easy to install our holder on a cable. Just strip off the
appropriate length of cable insulation and insert it into the
holder body, then tighten down the large oval-point screw
with a hex wrench. This makes an excellent connection.
As a safety precaution, the handle retention screw is
upset to prevent removal.
Electrode Holders
Part # Amp Capacity Cable Capacity Electrodes Up to
Length
Weight
M-200 200-250
1/0 (50mm2)
5/32” (3.97mm)
8 1/4” (210mm)
12 1/2 oz. (360g)
M-250 250-300
2/0 (70mm2)
3/16” (4.75mm)
8 1/2” (216mm)
16 oz. (450g)
M-300 300-350
2/0 (70mm2)
1/4” (6.35mm)
10” (254mm)
21 oz. (600g)
M-350 350-400
3/0 (70mm2)
1/4” (6.35mm)
10” (254mm)
24 oz. (680g)
M-500 450-500
4/0 (95mm2)
3/8” (9.53mm)
10 1/2” (267mm) 31 oz. (880g)
MHT-200 200-250
1/0 (50mm2)
5/32” (3.97mm)
9” (229mm)
13 oz. (310g)
MHT-250 250-300
2/0 (70mm2)
3/16” (4.75mm)
9 3/4” (248mm)
19 oz. (450g)
MHT-300 300-350
2/0 (70mm2)
1/4” (6.35mm)
10 1/2” (267mm) 23 oz. (650g)
MHT-350 350-400
3/0 (70mm2)
1/4” (6.35mm)
10 1/2” (267mm) 24 oz. (680g)
MHT-500 450-500
4/0 (95mm2)
3/8” (9.53mm)
10 1/2” (267mm) 31 oz. (880g)
MLT-250 250
2/0 (70mm2)
3/16 (4.75 mm)
8” (203 mm)
11 oz. (310g)
MLT-400 400
3/0 (70mm2)
1/4” (6.35mm)
8 15/16” (227mm) 22 oz. (624g)
Weldmark® holder handles are molded from a durable glass filled nylon material with good heat and impact resistance.
Weldmark® electrode holders (upper and lower tongs) are made from a high copper alloy for maximum conductivity and
strength. The top and bottom tip insulators are a molded fiberglass compound and will withstand intensive heat and impact.
Parts for all models are replaceable.
WEM M 300
WEM MHT250
WEM MLT400